Hansen Brand Coaxial Feeder Cable 7/8” Rudzi rweKurasikirwa Kushoma 3A01170028
| Kuvaka | |||
| kondakita wemukati | zvinhu | chubhu yemhangura yakatsetseka | |
| dia. | 9.30±0.10 mm | ||
| kuputira | zvinhu | PE yakaputirwa nefuro | |
| dia. | 22.40±0.40 mm | ||
| kondakita wekunze | zvinhu | mhete yemhangura yakakombama | |
| dhayamita | 25.60±0.30 mm | ||
| bhachi | zvinhu | PE kana PE inodzivirira moto | |
| dhayamita | 27.90±0.20 mm | ||
| hunhu hwemakanika | |||
| kukotama nharaunda | kuroora kana kuroorwa kudzokorora kufamba | 127 mm 254 mm 500 mm | |
| simba rekudhonza | 1590 N | ||
| kuramba kupwanya | 1.4 kg/mm | ||
| tembiricha inokurudzirwa | bhachi rePE | chitoro | -70±85°C |
| kugadzwa | -40±60°C | ||
| mashandiro | -55±85°C | ||
| bhachi rePE rinodzivirira moto | chitoro | -30±80°C | |
| kugadzwa | -25±60°C | ||
| mashandiro | -30±80°C | ||
| hunhu hwemagetsi | |||
| kuvharirwa | 50±2Ω | ||
| kugona | 75 pF/m | ||
| inductance | 0.19 uH/m | ||
| kumhanya kwekupararira | 87% | ||
| Kukanganiswa kwemagetsi kweDC | 6.0 kV | ||
| kudzivirira kuputira | >5000 MQ.km | ||
| simba repamusoro-soro | 91 kW | ||
| kucheneswa kwekuongorora | >120 dB | ||
| kakawanda kekugumira | 5.0 GHz | ||
| kuderedza simba uye avhareji yesimba | |||
| kakawanda, MHz | chiyero chemagetsi @ 40°C, kW | nom.attenuation@20°C,dB/100m | |
| 200 | 5.05 | 1.67 | |
| 450 | 3.29 | 2.55 | |
| 800 | 2.42 | 3.48 | |
| 900 | 2.26 | 3.7 | |
| 1000 | 2.14 | 3.93 | |
| 1800 | 1.54 | 5.44 | |
| 2000 | 1.46 | 5.77 | |
| 2200 | 1.38 | 6.09 | |
| 2500 | 1.28 | 6.55 | |
| 3000 | 1.15 | 7.27 | |
| kukosha kwakanyanya kwekuderedzwa kwesimba kunogona kunge kuri 105% yehuwandu hweattenuaiton hwakatarwa. | |||
| VSWR | |||
| 690-960MHz | ≤1.12 | ||
| 1700-2200MHz | ≤1.15 | ||
| 2300-2400MHz | ≤1.15 | ||
| mitemo | |||
| 2011/65/EU | kutevedzera mitemo | ||
| IEC61196.1-2005 | kutevedzera mitemo | ||
Chinongedzo cheKurongedza
RF Chinongedzo
Muenzaniso: TEL-4310F.12-RFC
Tsananguro
Chinobatanidza chechikadzi che 4.3-10 che 1/2″ RF cable inochinjika
| Zvinhu uye Kuisa Plating | |
| Kubata pakati | Brass / Sirivha Plating |
| Chinodzivirira | PTFE |
| Mutumbi & Mutyairi weKunze | Brass / alloy yakafukidzwa ne tri-alloy |
| Gasket | Rabha reSilicon |
| Hunhu hweMagetsi | |
| Hunhu Impedance | 50 Ohm |
| Rudzi rweMafambiro | DC~3 GHz |
| Kudzivirira Kudzivirira | ≥5000MΩ |
| Simba reDielectric | ≥2500 V rms |
| Kudzivirira kubata pakati | ≤1.0 mΩ |
| Kudzivirira kubata kwekunze | ≤1.0 mΩ |
| Kurasikirwa Kwekuisa | ≤0.1dB@3GHz |
| VSWR | ≤1.1@-3.0GHz |
| Tembiricha yekudziya | -40~85℃ |
| PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
| Mvura isingapindi mvura | IP67 |
Mirayiridzo yekuisa N kana 7 / 16 kana 4310 1 / 2″ tambo inochinjika zvakanyanya
Maumbirwo echinobatanidza: (Mufananidzo 1)
A. nzungu yepamberi
B. nzungu yekumashure
C. gasket
Zviyero zvekubvisa zvidimbu zviri sezvinoratidzwa nedhayagiramu (Mufananidzo 2), kungwarira kunofanira kupiwa panguva yekubvisa zvidimbu:
1. Nzvimbo yekupedzisira yemuchina wemukati inofanira kunge yakapwanyika.
2. Bvisa tsvina yakaita se copper scale ne burr pamusoro pe wire.
Kuunganidza chikamu chekuvhara: Vhara chikamu chekuvhara mukati uchitevedza kondakita yekunze yetambo sezvakaratidzwa nedhayagiramu (Mufananidzo 3).
Kuunganidza nzungu yekumashure (Mufananidzo 3).
Sanganisa nati yekumberi neyekumashure nekugadzira screws sezvakaratidzwa padhayagiramu (Mifananidzo(5))
1. Usati waisa screw, isa mafuta ekuzora pamusoro peo-ring.
2. Chengeta nhete yekumashure netambo zvisina kufamba, vhara ganda guru remuviri wegoko rekumashure. Vhara ganda guru remuviri wegoko rekumashure uchishandisa chipanera chetsoko. Kuunganidza kwapera.
